Straight-wall hangars

Straight-wall hangars

Straight-wall hangars TAF-87 is a rectangular or square structure with straight walls and a roof, which is used to store various types of equipment, machinery, vehicles, raw materials or finished products. This type of hangar usually has one or more large gates or doors for the entry and exit of vehicles or equipment.

Prices for TAF-87 straight-wall hangars:

№	Typical dimensions LxWxH, m	Characteristic	Price
1	individual	economy	from 1 900 UAH/sq.m
2	individual	standard	from 3 000 UAH/sq.m
3	individual	individual	individual

“TAF-87” LLC will carry out load calculation, manufacture, delivery and installation of the hangar in accordance with the issued technical conditions with high quality and on time.

We have more than 12 years of experience in the manufacture of similar structures. To fulfill the order, there are labor resources, production areas, necessary transport, scaffolding, machines and equipment (sheet bending machine, guillotine, cutting and cutting machines).

Typical design:

• foundations — point piles, piles;
• supports — paired channel;
• trusses — a profile pipe with a cross-section of 50x50x2 mm;
• purlins — a profile pipe with a cross-section of 80x40x2 mm;
• strapping — a profile pipe with a cross-section of 60x30x2 mm;
• diagonal connections — a profile pipe with a cross-section of 50x50x2 mm;
• roofing — corrugated galvanized wave 57 mm with a three-layer membrane;
• walls — 20 mm galvanized corrugated sheet;
• gate — 1 pc with a gate;
• additionally — light windows and stairs.

Typical sizes:

• width (single-pass) — 9.0 m, 12.0 m, 18.0 m, 24.0 m, 30.0 m, 36.0 m (multiple metal cutting);
• width (2 or more spans) — not regulated, from 4.0 m to 240.0 m.;
• length — 12.0 m, 15.0 m, 18.0 m, 20.0 m, 24.0 m, 30.0 m, etc. (multiples of metal cutting);
• useful height: 3.2 m (forklifts, low-tonnage trucks), 4.5 m (trucks), 6.0 m (dump trucks), 8.0 and more (crane-beam, production);
• slope — from 10 cm per m. p.

The cost is on average from 50 to 80 USD per square meter on the floor

The cost of the works includes: calculation of the main loads, raw materials, manufacturing, delivery, installation, cladding, vapor barrier device, accompanying documents (technical passport, quality certificates for materials, assembly drawings of the main parameters and nodes, instructions for operating the module and its components).

Negotiable separately on request: drilling machine, truck crane, telescopic truck tower, accommodation, electricity, water.

The average production time of a hangar 24×40 m, which is located in the Kharkiv region:

• 1-7 days of preparation;
• 8-20 days of manufacturing the structure;
• 15-25 days of delivery to the installation site;
• 21-40 days installation of the frame with cladding;
• 41-45 days of finishing.

The main characteristics of straight-walled hangars may include:

1. Sizes: They can have different sizes depending on the needs and requirements of the customer. Straight-wall hangars can be relatively small for small-scale equipment or vehicle storage, or can be very large for large industrial needs.
2. Materials: They are usually made of metal (steel or aluminum), concrete, or a combination of these materials. The choice of materials depends on the budget, the operating environment, the need for strength and other factors.
3. Roofing: Straight-wall hangars can have different types of roofing, such as metal sheets, slate, polycarbonate sheets, or other materials that provide protection from the weather.
4. Doors: These usually have large gates or doors for easy entry and exit of vehicles or equipment. These gates can be folding, sliding or lifting.
5. Functionality: Straight-wall hangars can be used for various purposes, such as equipment storage, warehouse needs, production processes, agricultural purposes and others. They can also be used as garages for vehicles, hangars for aircraft, warehouses for building materials, etc.

Straight-wall hangars are popular structures in the industrial, commercial and agricultural sectors due to their ease of installation, strength and versatility in application.