TAF-87 provides surface preparation and painting services for metal structures, helping protect them against corrosion and improve their appearance. Coatings for other materials are selected according to the substrate and project requirements.
Metal Structure Painting Prices
No.
Service
Price
1
Application of GF-021 primer
From UAH 100/m²
2
Painting with PF-115 enamel in the selected colour
From UAH 300/m²
3
On-site priming at the customer’s premises
From UAH 150/m²
4
On-site painting at the customer’s premises
From UAH 450/m²
5
Other services
Price on request
For more information, please contact our sales department at +380 50 915 05 38
Main Stages of Metal Structure Painting
The painting process typically includes the following stages:
Surface preparation: Before painting, the surface is thoroughly prepared. Depending on its condition and the coating specification, preparation may include washing, degreasing, mechanical cleaning, and removal of dust, dirt, rust, and loose or incompatible existing paint. Suitable cleaning agents or solvents are used where required.
Corrosion protection: Rust and other corrosion products are removed to the standard required by the selected coating system. A compatible anti-corrosion primer is then applied where specified to help protect the metal against further corrosion.
Coating selection: The coating system is selected according to the substrate, project requirements, and operating conditions. Factors include the required colour, expected service life, exposure to moisture and sunlight, and compatibility between the primer and subsequent coats.
Paint application: Coatings may be applied by brush, roller, or spray equipment, depending on the product and the structure. Application follows the coating manufacturer’s instructions, including requirements for surface condition, coating thickness, environmental conditions, and recoating intervals.
Drying and curing: Each coat is allowed to dry and cure according to the manufacturer’s recommendations. The time required depends on the coating type, film thickness, temperature, humidity, and ventilation.
Finishing and inspection: The finished coating is checked for coverage, appearance, and defects. Touch-ups or additional compatible protective coats are applied where specified. Any colour matching or tinting is completed before application, rather than after the coating has dried.
This is a general overview of the painting services provided by TAF-87. The exact preparation methods, materials, and application procedures depend on each project’s requirements.
Work is carried out with attention to the relevant safety requirements and coating specifications to achieve a protective, durable, and visually consistent finish.